MUTOH Rockhopper II Series Guía de usuario Pagina 88

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 137
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 87
User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
88 AP-75198– Rev. 1.2
6 .5.1.10 Th icknessm enu
Set the media thickness.
Setup items Parameters Description
Thickness 50µm-<100µm>1500µm Change media thickness by operating the following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value
Notes
Bidirectional quality can only be obtained when media thickness is set correctly
6 .5.1.11 H ea term enu
Set the temperature of the Heater.
Setup items Parameters Description
Heater OFF  50°C Change heater temperature by operating the following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value
Notes
The default setting for the heater is set to 50°C.
The function of the heater (A): Warming the transfer paper before entering the pressure rollers. The
pre-expansion helps to minimize media cockling.
6 .5.1.12 F ixerm enu
Set the temperature of the Fixer.
Setup items Parameters Description
Fixer OFF  40°C Change fixer temperature by operating the following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value
Vista de pagina 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 136 137

Comentarios a estos manuales

Sin comentarios