MUTOH Rockhopper II Series Guía de usuario descargar pdf (Pagina 32)

Handling Roll Media – User’s Guide

AP-75100, Rev.2.0, 26/11/04

3.2.3. Connecting the cables

The connection procedure for the power cable is explained below.

Notes :

• Refer to the following for important information on the connection of the power

cable. User’s Guide : Connecting the power cable.

• Use a cable that is suitable to the local power specifications when connecting the

power cable.

• If the power cable is damaged, contact one of the following :

o The shop where you bought the product

o Nearest MUTOH local dealer

Connect the power cable according to the following procedure.

Step 1 : Make sure that the printer is OFF.

1. Power switch

Step 2 : Plug the power cable to the AC inlet on the left side of the winder 30 motorized unit.

1. AC inlet 2. Power cable

Step 3 : Plug the cable correctly to the outlet.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 94 95

Sin comentarios

MUTOH Rockhopper II Series Guía de usuario Pagina 32