MUTOH Rockhopper II Series Guía de usuario descargar pdf (Pagina 54)

Handling Roll Media – User’s Guide

AP-75100, Rev.2.0, 26/11/04

4.4. ASSEMBLY

The assembly of the unwinder / winder 100 is divided into two parts.

¾ Assembling the motorized roll-off/roll-up system

¾ Assembling the tensioning system

4.4.1. Assembling the unwinder / winder 100 and waste bottle

To assemble the unwinder / winder 100 and waste bottle onto the Rockhopper II series printer, please follow

the instructions mentioned onto the CD-rom included with this manual.

Caution :

• Please note it is necessary to remove the scroller receiver before installation of the

unwinder / winder 100.

• Please note that all parts described in the drawings, can slightly be different on the

drawing then in-the-box. This because of revisions.

• Make sure the printer is positioned stable and horizontally (before installation of the

unwinder/winder 100). Make use of a level.

This chapter is divided in two. This because there has to be made a difference between unwinder/winder 100

systems manufactured before 2005 and system manufactured as from 2005.

As from manufacturing date 2005

Before manufacturing date 2005

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 94 95

Sin comentarios

MUTOH Rockhopper II Series Guía de usuario Pagina 54