MUTOH Rockhopper II Series Guía de usuario descargar pdf (Pagina 88)

Handling Roll Media – User’s Guide

AP-75100, Rev. 2.0, 26/11/04

Step 12 : Insert the adjustment brackets at the left or right side (depending on the deviation) of the winder

system below the rail assembly.

Step 13 : If both lines overlap, calibrations is OK.

Step 14 : Now fix the screws with roll so the rail assy doesn’t move anymore.

Step 15 : Perform the same adjustment procedure for the unwinder at the rear unit.

Step 16 : If this is completed, your calibration of the unwinder/winder 100 is finished.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 94 95

Sin comentarios

MUTOH Rockhopper II Series Guía de usuario Pagina 88