MUTOH Rockhopper II Series Especificaciones descargar pdf (Pagina 107)

Rockhopper II series printers – Maintenance Manual

108

AP-74065, Rev. 1.2, 27/09/04

4.7.9. Replacing the cursor roller assembly

Notes :

¾ Remove following cover before replacing the Cursor roller assembly.

 Side cover R: refer to "Removing side cover R"

 Side cover L: refer to "Removing side cover L"

 Front cover: refer to "Removing the front cover"

 Carriage cover: refer to "Removing the carriage cover"

 Y rail cover: refer to "Removing the Y rail cover"

 Head cover: refer to "Removing the head cover"

4.7.9.1. Replacing the cursor roller assembly (upper 2 cursor rollers)

Step 1 : Follow the instructions in "Replacing the CR cursor assembly " to remove the CR cursor

assembly.

Step 2 : Remove the E ring fixing the cursor roller assembly.

1 = CR cursor assembly (KY-80040) 2 = E ring fixing the cursor roller assembly.

Step 3 : Replace the cursor roller assembly.

Step 4 : Reinstall all parts in the opposite order of the removal procedure.

Step 5 : Perform head height adjustment according to "Head height adjustment".

4.7.9.2. A. Replacing the cursor roller assembly (6 high-load bearings) : Large bearing

type

Step 1 : Follow the instructions in "Replacing the CR cursor assembly " to remove the CR cursor

assembly.

Step 2 : Remove the side cursor roller assemblies and B cursor axises together with flat-head driver or

another tool.

1 = CR cursor assembly 2 = B cursor axis

Step 3 : Remove the E ring fixing the cursor roller assembly of downside.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 318 319

Sin comentarios

MUTOH Rockhopper II Series Especificaciones Pagina 107