MUTOH Rockhopper II Series Especificaciones descargar pdf (Pagina 124)

Rockhopper II series printers – Maintenance Manual

125

AP-74065, Rev. 1.2, 27/09/04

(2) Replacing the ink ID board assembly and the holder pressure spring

Step 1 : Remove the I/H assembly.

Step 2 : Remove the 2 screws fixing the holder pressure spring.

1 = Holder pressure spring (two-ply use) 2 = Screws (M3x6) fixing the holder pressure spring

3 = Ink ID board assembly 4 = SC cable assembly

Step 3 : Replace the holder pressure spring.

Step 4 : Remove the SC cable assembly connector from the ink ID board assembly.

Step 5 : Replace the ink ID board assembly.

Step 6 : Reinstall all parts in the opposite order of the removal procedure.

(3) Replacing the cartridge frame assembly

Step 1 : Remove the I/H assembly.

Step 2 : Remove the cables from the I/H assembly clamp.

Step 3 : Disengage the hook fixing the cartridge frame assembly, and then slide the cartridge frame

assembly in the direction of the arrow to remove it.

Step 4 : Slide the cartridge frame assembly in the direction of the arrow to remove it.

1 = Cartridge frame assembly 2 = Hook

Step 5 : Replace the cartridge frame assembly.

Step 6 : Reinstall all parts in the opposite order of the removal procedure.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 318 319

Sin comentarios

MUTOH Rockhopper II Series Especificaciones Pagina 124