MUTOH Rockhopper II Series Especificaciones descargar pdf (Pagina 167)

Rockhopper II series printers – Maintenance Manual

168

AP-74065, Rev. 1.2, 27/09/04

5.5.8. Top & bottom adjustment menu

Sets printing margins.

Make adjustments following the steps below.

Step 1 : Set media as necessary.

Step 2 : After the media has been set, pattern printing with band feed compensation and media cutting

are performed. The following is the description of the printing method.

¾ Black, one path, one-way

Step 3 : Measure the following adjustment items for the results of the printing of the top & bottom

adjustment pattern.

Measurements are carried out at the center of the media. The adjustment items are as follows.

¾ Top distance

¾ Bottom distance

¾ Side margin

1: Top distance

2: Bottom distance

3: Side margin

4: Media feed direction

Step 4 : Input each measurement as a parameter.

* Top&Bottom *

Set Paper If media is not set

↓ Set media

* Top&Bottom *

Paper Initial

↓ End Media Initialization

* Top&Bottom *

Adjustment Print Display during adjustment printing

* Top&Bottom *

Top Length 0 – 40.0 +

5.0 mm -

* Top&Bottom *

Top Length 0 – 40.0 +

5.0 mm -

* Top&Bottom *

Side 0 – 20.0 +

5.0 mm -

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 318 319

Sin comentarios

MUTOH Rockhopper II Series Especificaciones Pagina 167